Analog Delay

From WiKPA
Jump to: navigation, search

Description

Effect description goes here

Parameters

  • Mix
  • Time
  • Ratio - The “Delay Ratio” determines the ratio of different delay times between the left and right delay taps. The “Delay Time” always represents the longer delay tap, the other “Delay Time” is just a divider of the displayed time. As with the Tap Delay, the feedback is only taken from the left delay tap; thus, swapping the ratio of the left and right delay tap will not only reverse the stereo sides, but also produce a different rhythm pattern. --Kemper Reference Manual
  • Feedback
  • Bandwith
  • Center Freq
  • Mod
  • Volume

Tips/Settings


Have you tried adjusting the Time parameter of the Analog Delay while playing with high Feedback? Hello Zeppelin!

-DonPeteersen
 

Q: I find that the highs are there but the delays are often lacking in the bass frequencies (of course, too much bass on repeats = total mud). Any recommendations?

A: Make sure the Bandwidth parameter of the delay in question is set to '0' to get uncolored repeats.


Another personal suggestion is to use

  • Ratio: 3:4

for a for "wider" stereo image, if needed.

-Maurizio70