8,720
edits
Changes
m
with a [http://www.uno4kemper.com/ UnO4Kemper EPROM chip] installed. The UnO4Kemper firmware ] is an unofficial firmware for the FCB1010 made by a 3rd party author. It comes on an EPROM chip that can be switched out for the factory chip after opening the FCB1010 up.
→UnO4Kemper
==== UnO4Kemper ====
This firmware will instantly turn your FCB1010 into a dedicated Kemper controller. The main advantage of this chip is it is as plug and play as you will find to get a working pedalboard for the Kemper, other than the official Kemper Remote. The bad part is that it makes the FCB1010 only work with the Kemper and you cannot do advanced customization of how the controller operates (such as assigning multiple effects to toggle on a single button). Also, if Kemper updates the KPA software to add new features, there is no method to update your current UnO4Kemper chip to support those features - you will have to purchase a new chip once the UnO4Kemper firmware is updated to support the feature.