Changes

This firmware will instantly turn your FCB1010 into a dedicated Kemper controller. The main advantage of this chip is it is as plug and play as you will find to get a working pedalboard for the Kemper, other than the official Kemper Remote. The bad part is that it makes the FCB1010 only work with the Kemper and you cannot do advanced customization of how the controller operates(such as assigning multiple effects to toggle on a single button). Also, if Kemper updates the KPA software to add new features, there is no method to update your current UnO4Kemper chip to support those features - you will have to purchase a new chip once the UnO4Kemper firmware is updated to support the feature. The full list of features is found in [http://www.uno4kemper.com/UnOforKemper_manual.pdf the manual]. * Bank (Performance) Up/Down* One row of buttons is used for rig selection and the other for toggling effects on/off* The rows' functions can be swapped.* Available effects/functions are A-D, X, Mod, Delay, Reverb, change rotary speaker effect speed, tap tempo, and display tuner* Each effect toggle footswitch can be assigned to any 1 of those effects/functions.* One expression pedal controls CC 1 (wah wah) and the other CC 7 (Volume). These can be swapped.* Expression pedals can each be configured to use 1 out of 5 possible sweep curves.* 2-way communication with KPA using 2nd MIDI cable. Keeps footswitch LEDs in sync with KPA effects when switching rigs.* Can display KPA tuner on FCB1010* Can use KPA Beat Scanner function for tempo* Force KPA to enter Browse Mode or Performance Mode