8,720
edits
Changes
m
While in Browser mode, page 12 allows you Page 14 has some settings for allowing an expression pedal that was set to assign the current rig Wah Wah on pages 5 - 10 or MIDI CC 1 to also control volume or pitch-shifting, when not being used for a wah wah effect. It also has settings for sending the KPA's MIDI Program Change number, as well as view all clock to external devices and setting the MIDI assignmentsglobal channel (omni by default). NoteAnd you can also see the current MIDI CC values for 4 of the most likely used CC's, controlling modulation, these are only for Browser modepitch, not performance modevolume, where more than MIDI bank of 128 rigs each can be assignedand monitor volume.
While in Performance modeNote, page 13 allows assigning external devices if you link a wah pedal to the MIDI Out and Thru portsvolume, as well as giving them device nameswhen you disable a wah effect on a rig, and specifying which channels the Kemper should use to communicate with them. Page 14 has some settings for allowing an expression pedal that was set to Wah Wah on pages 5 - 10 or MIDI CC 1 will not begin to also control volume or pitchuntil you put it fully in the toe position -shifting, when not being used for this prevents a jump in volume if your wah wah effectpedal is not in toe position when you turn it off. It also has settings for sending Similarly, if wah is linked to pitch, when you disable wah/enable pitch, the KPA's MIDI clock pedal will not begin to external devices and setting affect the MIDI global channel (omni by default). And you can also see pitch until it is brought fully to the current MIDI CC values for 4 of heel position, again to prevent the most likely used CC's, controlling modulation, pitch, volume, and monitor volumejumping on the transition.
→MIDI Assignments and Settings
==== MIDI Assignments and Settings ====
=== Rig Menu Volume Pedal Settings ===