8,720
edits
Changes
m
* {|class="wikitable"|-| 1. First session. Carvin Legacy 4x12 was chosen previously. Shure SM57 & Audio Technical AT4040 mics into an Allen Heath Mix Wizard 16:2. See [http://foobazaar.com/kemper/HAWP/HAWP%20Friedman%20BE100%20Phase-01/ReadMe.txt readme] for details on amp settings and mic placements.* |-| 2. Added clean profile, gain-matched profiles between BE and HBE channels, and various distances on the AT4040.* |-| 3. Added more Treble and Presence per Oozish's suggestions.* |-| 4. Tried increasing Gain, changing Mids, and flipping the Voice switch.* |-| 5. Tried SM57 at 20 degrees (off axis) vs. 0 degrees (on axis).* |-| 6. Messing with all the switches. See the readme for a description of what each is designed to do.* |-| 7. Comparing different Master Volume settings.* |-| 8. Comparing different switch settings at different Gain settings - lots of profiles* |-| 9. Try out the new Merging process on beta firmware 2.7.4. Direct Amp, Studio, and Merged profile based on LiamThompson's settings.* |-| 10. Hallan's requested settings with Master Volume ranging from 2 to 5.* |-| 11. Hallan's mid-gain settings with various Gain and Master Volume settings.* |-| 12. Tried a number of settings for clean profiles* |-| 13. Hallan low gain settings* |-| 14. Comparing Smallbox BE channel vs. HBE-100 BE channel, Direct Amp profiles included* |-| 15. LiamThompson settings with various Bass and Master Volume tweaks, Direct Amp profiles* |-| 16. Comparing Celestion Vintage 30 speaker vs. Scumback M75 in the 4x12 at various Gain levels* |-| 17. Trying BE and HBE channels at various Gain levels through a 1x12 loaded with the Scumback M75* |-| 21. Numerous Direct Amp and Studio profiles using the 3.0.1 FW; Wingee, LiamThompson, and Tim Owens (with various Gain) settings* |-| 22. Hallan settings, Direct Amp with FW 3.0.1* |-| 23. Hallan settings again with SAT off and Treble a bit lower* |-| 24. Sargeant Pepper's settings, various Gain, and boosted with a TS* |-| 25. LiamThompson settings with Mids up to 6-7* |-| 26. Settings from [http://youtube.com/watch?v=7T9uzDasXag Phil X video] - various switches and speakers used, DA profiles included* |-| 27. Comparing the HBE-100 and Dirty Shirley amps, Direct Amp profiles and merged cab profiles provided* |-| 28. Various channels and switch options, one experimental profile with homemade load box to make Direct Amp profiles at 0 volume* |-| 29. Test profiles with Royer R-121 and Shure SM57 mics* |-| 31. no readme - check forum* |-| 32. Duplicated Session 21 with Royer R-121 mic (without preamp) and Scumback M75 speaker.* |-| 37. Heavy Mids, low Bass settings, various Gain and both BE and HBE channels|}
no edit summary
The number of HAWP sessions is quite large and can be confusing what the differences are between them. Where should you start? Note that the HAWP sessions were an attempt at a community-feedback project to find the absolute best settings/profiles of a particular amp. Many sessions are "tests" to compare some suggested change from a prior session, or to isolate changes in individual switches or parameters. Here's a breakdown of the sessions:
{{Kemper Guide Crumbs|10}}