8,720
edits
Changes
m
→External Expression Pedal/Footswitch Setup
=== External Expression Pedal/Footswitch Setup ===
Pages 5 - 10 cover how expression pedals or footswitches behave. Pedals 1 and 2 cover the two inputs on the back of the KPA, while Pedals 3 - 6 refer to inputs on the official Kemper remote. The Kemper also accepts MIDI CC messages to control its various parameters. In fact, the setup done here is simply mapping the pedal's anolog input to that appropriate MIDI CC # (1 for wah, 7 for volume, 4 for pitch, and 73 for monitor volume).
If you only have one expression pedal, you can still use it to do both wah and volume with some [[Kemper KPA External Control#Expression Pedals/Footswitches|additional setup]].
Pedal Type refers to the polarity of the expression pedal - type 1 is the normal type (Roland), while type 2 is reversed (Yamaha).
This is also where you would come to calibrate a new pedal, or after updating your KPA's firmware/OS. You simply press the button then do a full sweep.
=== Remote Display ===