8,720
edits
Changes
m
no edit summary
== Physical Inputs ==
{{crumbs|blue|1
|Kemper KPA Inputs and Outputs#Physical Inputs|Inputs
|Kemper KPA Inputs and Outputs#Input Settings|Input Settings
|Kemper KPA Inputs and Outputs#Physical Outputs|Outputs
|Kemper KPA Inputs and Outputs#Output Settings|Output Settings
|Kemper KPA Inputs and Outputs#Effects Loop (Profiling Send/Receive)|Effects Loop
|Kemper KPA Inputs and Outputs#Other Connectors|Other Connectors
}}
=== Front ===
The front input acts like a standard guitar amp/pedalboard input. When the input is set to SPDIF, this input can still function to output a DI signal for overdubs, depending on the output mode selected.
== Input Settings ==
{{crumbs|blue|2
|Kemper KPA Inputs and Outputs#Physical Inputs|Inputs
|Kemper KPA Inputs and Outputs#Input Settings|Input Settings
|Kemper KPA Inputs and Outputs#Physical Outputs|Outputs
|Kemper KPA Inputs and Outputs#Output Settings|Output Settings
|Kemper KPA Inputs and Outputs#Effects Loop (Profiling Send/Receive)|Effects Loop
|Kemper KPA Inputs and Outputs#Other Connectors|Other Connectors
}}
The Input block allows you to select the active input as well as adjust overall gain and clean/distorted volume balance.
== Physical Outputs ==
{{crumbs|blue|3
|Kemper KPA Inputs and Outputs#Physical Inputs|Inputs
|Kemper KPA Inputs and Outputs#Input Settings|Input Settings
|Kemper KPA Inputs and Outputs#Physical Outputs|Outputs
|Kemper KPA Inputs and Outputs#Output Settings|Output Settings
|Kemper KPA Inputs and Outputs#Effects Loop (Profiling Send/Receive)|Effects Loop
|Kemper KPA Inputs and Outputs#Other Connectors|Other Connectors
}}
=== Main ===
The Main Outputs can be sent as dual 1/4" or dual XLR, carrying a full stereo signal. They can be connected to a DAW or PA, as well as the effects loop return of a guitar amp, or the input of a dedicated power amp.
== Output Settings ==
{{crumbs|blue|4
|Kemper KPA Inputs and Outputs#Physical Inputs|Inputs
|Kemper KPA Inputs and Outputs#Input Settings|Input Settings
|Kemper KPA Inputs and Outputs#Physical Outputs|Outputs
|Kemper KPA Inputs and Outputs#Output Settings|Output Settings
|Kemper KPA Inputs and Outputs#Effects Loop (Profiling Send/Receive)|Effects Loop
|Kemper KPA Inputs and Outputs#Other Connectors|Other Connectors
}}
=== Modes ===
Each physical output can be assigned to operate in one of the following modes. These typically
== Effects Loop (Profiling Send/Receive) ==
{{crumbs|blue|5
|Kemper KPA Inputs and Outputs#Physical Inputs|Inputs
|Kemper KPA Inputs and Outputs#Input Settings|Input Settings
|Kemper KPA Inputs and Outputs#Physical Outputs|Outputs
|Kemper KPA Inputs and Outputs#Output Settings|Output Settings
|Kemper KPA Inputs and Outputs#Effects Loop (Profiling Send/Receive)|Effects Loop
|Kemper KPA Inputs and Outputs#Other Connectors|Other Connectors
}}
The KPA contains 3 Loop effects - Distortion, Mono, and Stereo Loop. These can be applied to Stomps A-D, X, and Mod. They send the signal at that block in the chain out the Direct Out/Send output. The signal returns through the Return input, as well as the Alternate Input when using the Stereo Loop.
== Other Connectors ==
{{crumbs|blue|6
|Kemper KPA Inputs and Outputs#Physical Inputs|Inputs
|Kemper KPA Inputs and Outputs#Input Settings|Input Settings
|Kemper KPA Inputs and Outputs#Physical Outputs|Outputs
|Kemper KPA Inputs and Outputs#Output Settings|Output Settings
|Kemper KPA Inputs and Outputs#Effects Loop (Profiling Send/Receive)|Effects Loop
|Kemper KPA Inputs and Outputs#Other Connectors|Other Connectors
}}
=== USB Slave ===
The square-shaped USB connector on the KPA is used to connect the KPA to a computer, in order to use the [[Kemper KPA Rig Manager|Rig Manager software]].