8,720
edits
Changes
m
→Stack
=== Stack ===
The Stack section contains the Amp, ToneStack, and Cab blocks. When the KPA creates a profile, it actually creates two profiles - one for the amp (feel/response and distortion tone) and one for the cab (frequency balance, resonance, and speaker characteristics). These blocks are different from all the rest, as most of their data is created through the profiling process and cannot be accessed or changed from the onboard controls.
The ToneStack contains standard Bass, Midrange, Treble, and Presence controls (BMTP) found on a real amp. These can be accessed through the [[#Big Knobs|large bass, midrange, treble, and presence knobs]]. Their setting is indicated via the LED ring around them, as well as being displayed numerically when adjusted. The settings can be stored as a preset like every other block.
''Note: the ToneStack is the same for every rig - it does not adjust to match the profile of the actual amplifier as modelers typically do. This can be good and bad - good in that you have consistency and know exactly what to expect from the ToneStack, but bad in that it takes more profiles of real amp settings to accurately match the amp's actual operation.''
=== Effects ===