8,720
edits
Changes
m
→Tempo
== Tempo ==
The KPA's tempo can be set by:
* a manual setting saved per rig(Rig Menu)* a manual setting saved per performance(Rig Menu when in Performance Mode)* a manual global setting(Check Lock Tempo on Rig Menu)
* using the tap tempo button or beat scanner
* receiving it from an external device
The KPA can also send its tempo to external devices.
Rigs can enable/disable tempo - this changes how certain effects behave. With tempo disabled, effects have settings based on milliseconds seconds (s or ms) or hertz (Hz). With tempo enabled, the settings are based on note values. Rigs inside a performance while in Performance Mode will have their tempo overridden by Performance tempo if selected, '''as long as the given rig has tempo enabled. It will not override tempo disabled on individual rigs.'''
If you have parts that require delays perfectly in sync with the beat, it's probably best to have your band play against a click track and dial in the exact correct delay time settings. The source of this tempo could potentially be the profilier, but more likely you'd use a DAW, where time changes can easily be programmed in. You could also use the DAW to program rig changes in the KPA.