8,720
edits
Changes
m
→System/Rig Menu Settings
Page 14 has some settings for allowing an expression pedal that was set to Wah Wah on pages 5 - 10 or MIDI CC 1 to also control volume or pitch-shifting, when not being used for a wah wah effect. It also has settings for sending the KPA's MIDI clock to external devices and setting the MIDI global channel (omni by default). And you can also see the current MIDI CC values for 4 of the most likely used CC's, controlling modulation, pitch, volume, and monitor volume.
=== Rig Volume Pedal Settings ===
* Lock Vol. Pedal - this setting will lock the current volume pedal settings below to apply to all rigs
* Wah Pedal to Vol. - this is a rig-level version of the [[#MIDI Assignments and Settings|page 14 pedal linking option above]]
* Location - this refers to a volume pedal's placement in the signal chain. Since a dedicated volume pedal doesn't require an effect slot like wah wah or pitch (whammy), you use this parameter to set where it should affect the signal.
* Range - this refers to whether the volume pedal should boost when moving from heel position to toe position (when set to right of center) or cut when moving from toe to heel position (when set left of center)