8,720
edits
Changes
m
→Output Settings
=== Modes ===
{{crumbs|blue2|1
|Kemper KPA Inputs and Outputs#Modes|Modes
|Kemper KPA Inputs and Outputs#EQ|EQ
|Kemper KPA Inputs and Outputs#Link and Levels|Link and Levels
|Kemper KPA Inputs and Outputs#Other Options|Other Options
}}
Each physical output can be assigned to operate in one of the following modes. These typically
=== EQ ===
{{crumbs|blue2|2
|Kemper KPA Inputs and Outputs#Modes|Modes
|Kemper KPA Inputs and Outputs#EQ|EQ
|Kemper KPA Inputs and Outputs#Link and Levels|Link and Levels
|Kemper KPA Inputs and Outputs#Other Options|Other Options
}}
The Monitor and Main Outs have global EQ that can be applied to them on pages 3 and 4 of the Output block. These can be used for venue-level adjustments.
=== Link and Levels ===
{{crumbs|blue2|3
|Kemper KPA Inputs and Outputs#Modes|Modes
|Kemper KPA Inputs and Outputs#EQ|EQ
|Kemper KPA Inputs and Outputs#Link and Levels|Link and Levels
|Kemper KPA Inputs and Outputs#Other Options|Other Options
}}
On page 2 of the Output block (and page 5 for SPDIF), you can manually set the levels of the different outputs. The "link" check boxes above link the output's level to the Master Volume knob, allowing them to be changed on the fly but retaining the relative differences in levels between linked outputs.
=== Other Options ===
{{crumbs|blue2|4
|Kemper KPA Inputs and Outputs#Modes|Modes
|Kemper KPA Inputs and Outputs#EQ|EQ
|Kemper KPA Inputs and Outputs#Link and Levels|Link and Levels
|Kemper KPA Inputs and Outputs#Other Options|Other Options
}}
There are two "Aux In" options used to blend the auxiliary input (which depends on the input source selected) with the KPA processed signal. This can be used to adjust the volume balance when jamming over backing tracks.