8,720
edits
Changes
m
→Input Settings
=== Input Selector ===
{{crumbs|blue2|1
|Kemper KPA Inputs and Outputs#Input Selector|Active Input
|Kemper KPA Inputs and Outputs#Noise Gate|Noise Gate
|Kemper KPA Inputs and Outputs#Clean Sense|Clean Sense
|Kemper KPA Inputs and Outputs#Distortion Sense|Dist Sense
|Kemper KPA Inputs and Outputs#Reamp Sense|ReampSense
}}
This selects the active input used to feed the KPA's signal chain. Choices are Front, Alternate, or SPDIF Reamp. In SPDIF Reamp mode, the Front input is still active, able to record DI tracks.
=== Noise Gate ===
{{crumbs|blue2|2
|Kemper KPA Inputs and Outputs#Input Selector|Active Input
|Kemper KPA Inputs and Outputs#Noise Gate|Noise Gate
|Kemper KPA Inputs and Outputs#Clean Sense|Clean Sense
|Kemper KPA Inputs and Outputs#Distortion Sense|Dist Sense
|Kemper KPA Inputs and Outputs#Reamp Sense|ReampSense
}}
''While this setting is not visible in the Input block, it is actually part of it - it locks with it and it stored and loaded in Input presets.''
=== Clean Sense ===
{{crumbs|blue2|3
|Kemper KPA Inputs and Outputs#Input Selector|Active Input
|Kemper KPA Inputs and Outputs#Noise Gate|Noise Gate
|Kemper KPA Inputs and Outputs#Clean Sense|Clean Sense
|Kemper KPA Inputs and Outputs#Distortion Sense|Dist Sense
|Kemper KPA Inputs and Outputs#Reamp Sense|ReampSense
}}
Clean Sense controls the volume balance between low and high gain settings for a particular rig. The KPA has a somewhat unusual way of handling a clean tone, which can be confusing. The KPA can only capture a profile at a certain gain setting but allows editing the gain on the resulting rig, all the way from completely clean to fully-saturated, mushy distortion. To do this, each amp profile contains a kind of parallel pair of clean and distorted profiles. From about 4 and below on the Gain knob, the profiles are blended inversely, and these can have a radically different volume level depending on how hot the pickups you use are. Clean Sense can be adjusted to make these roughly equal.
=== Distortion Sense ===
{{crumbs|blue2|4
|Kemper KPA Inputs and Outputs#Input Selector|Active Input
|Kemper KPA Inputs and Outputs#Noise Gate|Noise Gate
|Kemper KPA Inputs and Outputs#Clean Sense|Clean Sense
|Kemper KPA Inputs and Outputs#Distortion Sense|Dist Sense
|Kemper KPA Inputs and Outputs#Reamp Sense|ReampSense
}}
Distortion Sense functions as a gain level adjustment. When Input is locked, Distortion Sense allows quick adjustments from guitar to guitar to get a similar gain level (when desired). It's also useful if you find a profile pack where you'd like to demo the profiles quickly at different gain settings.
=== Reamp Sense ===
{{crumbs|blue2|5
|Kemper KPA Inputs and Outputs#Input Selector|Active Input
|Kemper KPA Inputs and Outputs#Noise Gate|Noise Gate
|Kemper KPA Inputs and Outputs#Clean Sense|Clean Sense
|Kemper KPA Inputs and Outputs#Distortion Sense|Dist Sense
|Kemper KPA Inputs and Outputs#Reamp Sense|ReampSense
}}
When using the SPDIF Reamp input source, this parameter replaces the Clean and Distorted Sense parameters. It is simply a level adjustment to the DI track and works similarly to Distortion Sense.