8,720
edits
Changes
m
no edit summary
On the other side, not as many features are available as in Browse mode. Also, there are less total rigs available - while Browse mode has a maximum of 1,000 rigs, Performance mode is limited to 625 (125 performances).
=== Organizing Performances ===
Performances can be saved to the KPA [[Kemper KPA Storing/Recalling Rigs, Presets, and Backups|just like rigs]] and quickly ordered using the soft buttons. Additionally, [[Kemper KPA Rig Manager|Rig Manager]] supports performances, allowing quick ordering and backing up of Performances outside of the KPA itself.
=== Quirks ===
The biggest mistake people make is not realizing that rigs in Performance Mode and Browse Mode are distinct copies. If you assign a rig from Browse mode to a performance slot, then edit that rig in Browse mode, those changes will not be present for that rig in the performance slot. You'll have to assign it to the slot again, or find the rig in Performance mode and edit it there.
'''Beat scanner''' is activated by holding down the tap tempo button. While holding it down, the Kemper uses your pick attack to try to auto-detect the tempo.
{{top}}
== Dual Output ==
Many people like to use a real guitar cabinet on stage behind them; but rather than mic'ing it to use for the house PA and their stage monitors, they want to use the KPA's cab/mic tone. This is possible by using the "Monitor Cab Off" option in the Output block. This will bypass the cab profile for the rig when using the monitor output. So send that to your real guitar cab to send it just the sound of the amp profile (plus effects), while the amp + cab profile is sent out the main outputs to the PA and monitors.
With OS 3.0, the KPA features '''merged profiles''', which benefit most from this application. Merged profiles have better isolation of the amp and cab's impact on the tone, so the amp profile + real guitar cab sounds more like the amp profile + cab profile of that same cab.
{{top}}
{{Kemper Guide Crumbs|13}}