8,720
edits
Changes
m
→System Menu Settings
=== System Menu Settings ===
Pages 5 - 10 cover how expression pedals behave. Pedals 1 and 2 cover the two inputs on the back of the KPA, while Pedals 3-6 refer to inputs on the official Kemper remote. The setup done here is simply mapping the pedal's anolog input to that appropriate MIDI CC # (1 for wah wah, 7 for volume, 4 for pitch, and 73 for monitor volume).
Note: if you only have one expression pedal, you can still use it to control wah, volume, and pitch with some additional [[#MIDI Assignments and Settings|MIDI setup below]]. You should set it to CC# 1 (Wah Wah). The KPA is actually very smart about this, and you don't really ever need more than one expression pedal, unless you like to have dedicated pedals, or have your wah/pitch with a spring in it to push it back to heel position, or do some crazy stuff where you jump between pedals.