Changes

Kemper KPA Effects

38 bytes added, 23:57, 8 March 2017
m
Differences in Delay Types
}}
''Note: OS 4.0 converts the 3 delay types in the legacy section below into a '''Legacy Delay''' type, and introduces preparing for 5.0 to introduce a slew of new delay types.''
==== OS 45.0 Delays ====While there are a large number of delay effects listed in OS 45.0, they all boil down to a few core delay types with different features available:
* '''Two-Tap Delay''' - features two delays that function in tandem, not independently. The first setting is the baseline setting, while the other is the offset of the first. So you can get pairs of delays such as 100ms, 120ms, 200ms, 220ms, 300ms, 320ms...
* '''Serial Delay''' - this is essentially two delays built into one effect, with the output of the first feeding directly into the input of the second. The second delay will repeat the raw guitar as well as the trails of the first.
[[Category:Guitar]]
[[Category:Gear]]
[[Category:Modelers]]
[[Category:Guides]]
[[Category:Kemper]]