8,720
edits
Changes
m
→External Expression Pedal/Footswitch Setup
If you only have one expression pedal, you can still use it to do both wah and volume with some additional setup.
=== Remote Display ===
Page 11 has some features similar to pages 1 dealing with the LCD display on the official Kemper remote.
=== MIDI Assignments and Settings ===
While in Browser mode, page 12 allows you to assign the current rig to a MIDI Program Change number, as well as view all the MIDI assignments. Note, these are only for Browser mode, not performance mode, where more than MIDI bank of 128 rigs each can be assigned.
While in Performance mode, page 13 allows assigning external devices to the MIDI Out and Thru ports, as well as giving them device names, and specifying which channels the Kemper should use to communicate with them.
Page 14 has some settings for allowing an expression pedal that was set to Wah Wah on pages 5 - 10 to also control volume or pitch-shifting, when not being used for a wah wah effect.
It also has settings for sending the KPA's MIDI clock to external devices and setting the MIDI global channel (omni by default).
=== Date/Time and Version ===
Page 15 contains the date and time (and buttons to edit), while page 17 contains version information.
=== Erase Non-Favorites ===
Page 16 is called Rig Management and has a single button to erase all profiles stored in the KPA that are not marked as favorites. I recommend not using this button since Rig Manager can more easily be used to delete the desired rigs. If you do find yourself wanting to use this, be sure to do a backup to a USB drive first.
=== LFC (Low Frequency Correction) ===