8,720
edits
Changes
m
→Reamping
== Reamping ==
The dry track should output to the left field of interface's SPDIF Loutput. Switch the Kemper's Input Source (tap the Input button) to SPDIF Reamp - this only listens for the left channel of the SPDIF input. You can use Reamp Sense to adjust for any gain differences if your DAW has manipulated the dry track volume.
Depending on your output settings (if you have one of the Git options selected), the Guitar Input is still active while the Input Source is set to SPDIF Reamp. It will output to the left SPDIF field (Git) while the wet signal (Stack, Mono L, Mono, Mod L, Mod) will output to right field. This is useful for if you notice mistakes in your DI tracks while reamping, allowing you to punch in quick fixes without changing KPA settings. The SPDIF signal input to the KPA will never output to Git - only to the other options - so there's no worry of a feedback loop here. If a stereo wet output setting is chosen, then the Guitar Input is disabled, and the SPDIF output will use both L and R.
If SPDIF is not available, the simplest setup is to use an analog output on your interface to connect to the KPA's Alternative Input. Then select this Input Source when you want to reamp.
{{top}}
{{Kemper Guide Crumbs|9}}