8,720
edits
Changes
m
→4 Band Shift EQ
It provides 4 peak/dip band EQ's with gain denoted in db's already.
* '''Lo freq ''' - centered around 90 HZ with shift at 50%, about 2 octaves wide. Use to boost/cut thump.* '''Low mid ''' - centered around 180 HZ with shift at 50%, about 2 octaves wide. Use to boost/cut punch.* '''Hi mid ''' - centered around 1 kHZ with shift at 50%, about 6 octaves wide. Use make the tone more or less midsy across the whole tone.* '''High ''' - centered around 4 kHZ with shift at 50%, about 5 octaves wide. Use like a treble control.* '''Shift ''' - causes the low and low mids bands to shift from higher to lower center frequencies, while causing the high and high mids bands to shift from lower to higher center frequencies, as shift moves from 0 to 100%. Shift move the center frequency of each band about 1 octave from its min to max setting.
This could potentially be used in conjunction with or to replace the amp EQ controls. Or maybe if you're not using an amp, it would make a good replacement for those. For messing with shift, set it towards 0% if you want the bands to affect the frequencies closer to the mids, 100% if you want them further away. I wouldn't really touch Shift until you've set the other bands, then see if it makes a bit of an improvement. Good Luck!