8,720
edits
Changes
m
→4 Band Shift EQ
* High - centered around 4 kHZ with shift at 50%, about 5 octaves wide. Use like a treble control.
* Shift - causes the low and low mids bands to shift from higher to lower center frequencies, while causing the high and high mids bands to shift from lower to higher center frequencies, as shift moves from 0 to 100%. Shift move the center frequency of each band about 1 octave from its min to max setting.
<gallery mode="packed-hover">
File:4_Band_Shift_EQ_-_Low_Freq.png|Low Freq
File:4_Band_Shift_EQ_-_Low_Mid.png|Low Mid
File:4_Band_Shift_EQ_-_Hi_Mid.png|
File:4_Band_Shift_EQ_-_Hi_Freq_chn1.png
File:4_Band_Shift_EQ_-_Hi_Freq_chn2.png
</gallery>
This could potentially be used in conjunction with or to replace the amp EQ controls. Or maybe if you're not using an amp, it would make a good replacement for those. For messing with shift, set it towards 0% if you want the bands to affect the frequencies closer to the mids, 100% if you want them further away. I wouldn't really touch Shift until you've set the other bands, then see if it makes a bit of an improvement. Good Luck!
=== Mid-Focus EQ ===