8,720
edits
Changes
m
→Walkthrough
# Pressing play in the DAW should generate output from the amp/modeler. This can be heard from the cab attached to the amp or headphones plugged directly into the modeler.
# The mic cable from the mic'ed cab or line out/SPDIF out from the modeler is plugged into the appropriate input on the audio interface. You should be able to see audio in the interface's control panel/mixer for that input when playing back the DAW track.
# DAW track 2 3 will record the reamped audio. Its input is set to the audio interface input from the above step. Its output can be the master bus or a group track. It is record armed.# Press record. Track 1 will output to the Line/SPDIF out connected to the amp/modeler, which outputs back into some input on the interface, which is captured in track 23.
== Caveats ==