Difference between revisions of "Kemper KPA Core Tone Tweaking"
m (→Amp Settings) |
m (→Cab Settings) |
||
| Line 11: | Line 11: | ||
== Cab Settings == | == Cab Settings == | ||
| − | * High Shift - Moves the high-frequency resonance | + | * <u>High Shift</u> - Moves the high-frequency resonance |
| − | * Low Shift - Moves the low-frequency resonance | + | * <u>Low Shift</u> - Moves the low-frequency resonance |
| − | * Character - Emphasizes or removes the formant peaks that characterize the cab/speaker(s) | + | * <u>Character</u> - Emphasizes or removes the formant peaks that characterize the cab/speaker(s) |
| − | * Volume - Used to level different cabinets | + | * <u>Volume</u> - Used to level different cabinets |
Revision as of 02:33, 18 February 2015
Amp Settings
The Amp block features the following parameters:
- Definition - Changes the nature of the distortion from vintage to modern
- Power Sagging - Increases simulated power sagging of the profiled amp
- Pick - Boosts or cuts the transient in the pick attack
- Compressor - Reduces the dynamic range of the profile
- Clarity - Increases the "clean" character of the amp while it remains distorted
- Tube Shape - Make the distortion "softer" or "harder"
- Tube Bias - Allows the signal to push into clipping more easily, increasing dynamic headroom inside distortion
- Direct Mix - Adds the direct (dry) guitar signal into the processed tone
Cab Settings
- High Shift - Moves the high-frequency resonance
- Low Shift - Moves the low-frequency resonance
- Character - Emphasizes or removes the formant peaks that characterize the cab/speaker(s)
- Volume - Used to level different cabinets