Changes

On page 2 of the Output block(and page 5 for SPDIF), you can manually set the levels of the different outputs. The "link" checkboxes check boxes above link the output's level to the Master Volume knob, allowing them to be changed on the fly but retaining the relative differences in levels between linked outputs. === Other Options ===There are two "Aux In" options used to blend the auxiliary input (which depends on the input source selected) with the KPA processed signal. This can be used to adjust the volume balance when jamming over backing tracks. Constant Latency is useful for reamping. Unchecked the KPA attempts to use the least amount of lag in the signal given the effects choices selected, which is normally a good thing. However, when reamping, different latency from the same DI can introduce some serious phase issues. When reamping, it's definitely recommended to check Constant Latency. ''The KPA latency is in most cases around 3ms for variable latency and 4.9ms when using Constant Latency''. The Headphone Space check box determines if the Space setting applies only to Headphones or to all outputs. When checked, the Space setting changes to "Headph. Space".