This is the third Kemper Community profile of the Splawn Quick Rod (Phase-03). Amp = Splawn Quick Rod (2011 Model). Speaker = Carvin Legacy 412 with stock Vintage 30's. Used dual mic's... Shure SM57 & Audio Technical AT4040. SM57 was 2" from the front of the speaker frame, 0.5" from the dome edge, angle = 0deg, level = 0dB. AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer). Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA. Last time I tried to brighten up the profiles by raising the presence and treble, I also tried moving the SM57 to the dome edge instead of 1/2 from the dome edge, none of this seemed to work very good so I'm going back to square one with some different mods. JerEvil suggested lowing the bass so we'll try that, he also gave his settings that he uses on his amp so we'll try that too. flcmcya said that he liked the first profiles after "nudging the mids and presence, then dropping the bass a little", I tried that but raising the presence didn't work so good, so we'll go back to the original settings and just try lowing the bass. I was using the O'Clock settings in the last two session because the QR doesn't have numbers on the controls, but that didn't seem to work out too good so from now on I will be using the normal 1 though 10 for the settings. These are the File/Rig names and what they mean: QR3 JerEvil (QuickRod Phase-3, 2ND Gear, OD=2, Gain=6, Pres=4, Bass=2.5, Mid=6, Treb=7, Master Vol=3) QR3 G05 1st OD1 (QuickRod Phase-3, 1st Gear, OD=1, Gain=5, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G05 1st OD2 (QuickRod Phase-3, 1st Gear, OD=2, Gain=5, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G05 2nd OD1 (QuickRod Phase-3, 2nd Gear, OD=1, Gain=5, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G05 2nd OD2 (QuickRod Phase-3, 2nd Gear, OD=2, Gain=5, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G05 3rd OD1 (QuickRod Phase-3, 3rd Gear, OD=1, Gain=5, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G05 3rd OD2 (QuickRod Phase-3, 3rd Gear, OD=2, Gain=5, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G08 1st OD1 (QuickRod Phase-3, 1st Gear, OD=1, Gain=8, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G08 1st OD2 (QuickRod Phase-3, 1st Gear, OD=2, Gain=8, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G08 2nd OD1 (QuickRod Phase-3, 2nd Gear, OD=1, Gain=8, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G08 2nd OD2 (QuickRod Phase-3, 2nd Gear, OD=2, Gain=8, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G08 3rd OD1 (QuickRod Phase-3, 3rd Gear, OD=1, Gain=8, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3) QR3 G08 3rd OD2 (QuickRod Phase-3, 3rd Gear, OD=2, Gain=8, Pres=6, Bass=3, Mid=8, Treb=6, Master Vol=3)