This is the second Kemper Community profile of the Splawn Quick Rod (Phase-02). Amp = Splawn Quick Rod (2011 Model). Speaker = Carvin Legacy 412 with stock Vintage 30's. Used dual mic's... Shure SM57 & Audio Technical AT4040. SM57 was 2" from the front of the speaker frame, 1/2 inch or zero inches (at the dome edge) from the edge of the dome, angle = 0deg, level = 0dB. AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 and 0 (on the mixer). Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA. Since the QR doesn't have numbers on the knobs I will use the O'Clock method to show the knob position. So 1 means 1:00, 9 means 9:00, etc. After trying the first profiles people reported that they needed more brightness (treble, presence or mic position). By the way, I agree with this assessment. So in this session we will try increasing the presence and treble and we'll try moving the SM57. Someone also suggested increasing the treble on the AT-4040 mic, it was at -5dB and we'll try 0dB. People also reported preferring the lower gain setting of 12 (noon), so for this session we'll go with these settings as a baseline and modify from there. Baseline Settings: Gain=12:00 Gear=3:00 Pres=1:00 (we'll raise this to 3:00) Bass=1:00 Mid=3:00 Treb=1:00 (we'll raise this to 3:00) OD=1 SM57 on Axis 1/2 inch from the dome edge (we'll move this to the dome edge) The master volume was at 10:30, all other knobs are listed in the file name. These are the File/Rig names and what they mean (the first one is our baseline). 1234567890123456789 QR2 P1 T1 SM.5 AT-5 (QuickRod, Pres=1:00, Treb=1:00, SM57 0.5" from dome edge, AT mic -5 treble) QR2 P3 T1 SM.5 AT-5 (QuickRod, Pres=3:00, Treb=1:00, SM57 0.5" from dome edge, AT mic -5 treble) QR2 P1 T3 SM.5 AT-5 (QuickRod, Pres=1:00, Treb=3:00, SM57 0.5" from dome edge, AT mic -5 treble) QR2 P3 T3 SM.5 AT-5 (QuickRod, Pres=3:00, Treb=3:00, SM57 0.5" from dome edge, AT mic -5 treble) QR2 P1 T1 SM.5 AT0 (QuickRod, Pres=1:00, Treb=1:00, SM57 0.5" from dome edge, AT mic 0dB treble) QR2 P3 T1 SM.5 AT0 (QuickRod, Pres=3:00, Treb=1:00, SM57 0.5" from dome edge, AT mic 0dB treble) QR2 P1 T3 SM.5 AT0 (QuickRod, Pres=1:00, Treb=3:00, SM57 0.5" from dome edge, AT mic 0dB treble) QR2 P3 T3 SM.5 AT0 (QuickRod, Pres=3:00, Treb=3:00, SM57 0.5" from dome edge, AT mic 0dB treble) QR2 P1 T1 SM0 AT-5 (QuickRod, Pres=1:00, Treb=1:00, SM57 0.0" from dome edge, AT mic -5 treble) QR2 P3 T1 SM0 AT-5 (QuickRod, Pres=3:00, Treb=1:00, SM57 0.0" from dome edge, AT mic -5 treble) QR2 P1 T3 SM0 AT-5 (QuickRod, Pres=1:00, Treb=3:00, SM57 0.0" from dome edge, AT mic -5 treble) QR2 P3 T3 SM0 AT-5 (QuickRod, Pres=3:00, Treb=3:00, SM57 0.0" from dome edge, AT mic -5 treble)