HAWP-27 2015-04-27 Note: These profiles were made with firmware 3.0.1.10908B In this session I am profiling both the Friedman BE100 and the Friedman Dirty Shirley. This time we will try something different, instead of making both Studio and Direct Amp profiles at each amp setting I am making Direct Amp profiles at various gain settings of each amp and I am sharing a handful of Cabs that I made during this profiling session. This way, you can try each cab with whichever Direct Amp profile that you want and you can save it as a Merged profile, or you can try other cabs with these Direct Amp profiles if you want. Important: To make the cabs I did a Studio profile and a Direct Amp profile, then I copied the cab from the Studio profile into the Direct Amp profile and I merged it. So, you don't need to merge these cabs, that has already been done, you just need to open them in the Direct Amp profile. To do this, simply select one of the Direct Amp profiles, press and hold the CABINET button until it is selected, then turn the BROWSE knob to select one of the cabs. Hint, if you like a certain cab you can press the lock button and it will stay while you scroll through the different Direct Amp profiles. Here is what the file names mean: H27 Cab-01 through Cab-15 (These are the cabs that I made for this session) H27D BE1 (HAWP-27, Direct Amp, this is the BE100, the BE channel, gain 1) H27D HBE1 (HAWP-27, Direct Amp, this is the BE100, the HBE channel, gain 1) H27D DS H1 (HAWP-27, Direct Amp, this is the Dirty Shirley, High input, gain 1) H27D DS L1 (HAWP-27, Direct Amp, this is the Dirty Shirley, Low input, gain 1) Etc... These are the BE100 amp settings: Bass=6 Mid=7 Treb=7 Pres=6 Mstr Vol=3 FAT=Off C45=Off SAT=Off These are the Dirty Shirley amp settings: Pres=5 Bass=3 Mid=8 Treb=6 Mstr Vol=3 If you find a cab that you like and would like to know how it was made please send me a "Conversation" and I'd be happy to give you the details.