This is the first Kemper Community profile of the Friedman Dirty Shirley head (Phase-01). Speaker = Carvin Legacy 412 with stock Vintage 30's. Used dual mic's... Shure SM57 & Audio Technical AT4040. SM57 was 2" from the front of the speaker frame, 1/2 inch from the edge of the dome, angle = 0deg, level = 0dB. AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer). Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA. The DS is a single channel amp with a high and low input. Here are the amp settings: Pres=5 Bass=3 Mid=8 Treb=7 Mstr Vol=3 Here are the file/rig names and what they mean: H01 DS Low-1 (HAWP-1, Dirty Shirley, Input=Low input, Gain=1) H01 DS Low-2 (HAWP-1, Dirty Shirley, Input=Low input, Gain=2) H01 DS Low-4 (HAWP-1, Dirty Shirley, Input=Low input, Gain=4) H01 DS Low-7 (HAWP-1, Dirty Shirley, Input=Low input, Gain=7) H01 DS High-1 (HAWP-1, Dirty Shirley, Input=High input, Gain=1) H01 DS High-2 (HAWP-1, Dirty Shirley, Input=High input, Gain=2) H01 DS High-4 (HAWP-1, Dirty Shirley, Input=High input, Gain=4) H01 DS High-7 (HAWP-1, Dirty Shirley, Input=High input, Gain=7)