HAWP-28
2015-05-03

Note: These profiles were made with firmware 3.0.1.10908B

In this session I am making DA profiles as per someone’s request.
The cab used to load the amp is the Legacy 412 with the stock Vintage 30's,
but see the note at the bottom of this document for one exception.

Here are the file/rig names and what they mean:

BE Channel (All same EQ, Gain and Volume settings)
Gain 8
Bass 7
Mid 6
Treble 6
Presence 6
Master 3.5

H28D BE C0 S0 VR (BE Channel, C45 Off, SAT Off, Voice Left)
H28D BE C0 S0 VR SL100 (BE Channel, C45 Off, SAT Off, Voice Left, using my own inductive load instead of the speaker cab)
H28D BE C0 S1 VR (BE Channel, C45 Off, SAT On, Voice Right)
H28D BE C0 S1 VL (BE Channel, C45 Off, SAT On, Voice Left)
H28D BE C1 S0 VR (BE Channel, C45 On, SAT Off, Voice Right)
H28D BE C1 S0 VL (BE Channel, C45 On, SAT Off, Voice Left)
H28D BE C1 S1 VR (BE Channel, C45 On, SAT On, Voice Right)
H28D BE C1 S1 VL (BE Channel, C45 On, SAT On, Voice Left)

HBE Channel
Gain 6
Bass 7
Mid 6
Treble 6
Presence 6
Master 3.5

H28D HBE C0 S0 VR (HBE Channel, C45 Off, SAT Off, Voice Right)
H28D HBE C0 S0 VL (HBE Channel, C45 Off, SAT Off, Voice Left)
H28D HBE C0 S1 VR (HBE Channel, C45 Off, SAT On, Voice Right)
H28D HBE C0 S1 VL (HBE Channel, C45 Off, SAT On, Voice Left)
H28D HBE C1 S0 VR (HBE Channel, C45 On, SAT Off, Voice Right)
H28D HBE C1 S0 VL (HBE Channel, C45 On, SAT Off, Voice Left)
H28D HBE C1 S1 VR (HBE Channel, C45 On, SAT On, Voice Right)
H28D HBE C1 S1 VL (HBE Channel, C45 On, SAT On, Voice Left)

NOTE: There is one experimental profile included, the "H28D BE C0 S0 VR SL100".
All other profiles were made with the amp loaded down with the Legacy 412 cab,
for this one profile the amp is loaded down with a homemade inductive load 
that I designed to emulate the impedance curve of the Legacy 412 cab.
I wanted to test it to see how it worked as an amp load while making
Direct Amp profiles. If it works good that would give me the option
of making DA profiles at zero room volume which could come in handy.
Also, I could use this and the Torpedo CAB to make Studio profiles
at zero room volume. Compare it to the "H28D BE C0 S0 VR" profile,
do you think that it sounds the same?