Have Amps, Will Profile: BE100 Phase 26 3/23/2015

In this session we will try to profile the amp with the settings from the Phil X demo
like Johnny333 requested (first try).

PLEASE NOTE: these profiles were made with firmware 3.0.1 and should not be used with any firmware lower than 3.0.0.

For the DA profiles the amp was loaded down with a Carvin Legacy 412 with Vintage 30's.

The video can be found here: https://youtu.be/7T9uzDasXag

If I understand everyone's input on this session, here's what we'll try...

Presence 4
Bass 6
Middle 6
Treble 5
Master 3,5
Gain 8
Channel = BE
Option switches = all possible combinations.
Cab = Legacy 412 with V30's and Legacy 412 with M75's.

Single SM57 mic, 3/4" from speaker frame, on the dust cap edge, 0deg angle.

Here are the file/profile names and what they mean:

H26D SAM VL Gain-4 (Same as "H26D XXX VL F0C0S0" but with a gain of 4)
H26D XXX VL F0C0S0 (Direct Amp profile, Voice Switch=Left, FAT=Off, C45=Off, SAT=Off)
H26D XXX VL F1C0S0 (Direct Amp profile, Voice Switch=Left, FAT=On, C45=Off, SAT=Off)
H26D XXX VL F0C1S0 (Direct Amp profile, Voice Switch=Left, FAT=Off, C45=On, SAT=Off)
H26D XXX VL F0C0S1 (Direct Amp profile, Voice Switch=Left, FAT=Off, C45=Off, SAT=On)
H26D XXX VL F1C1S0 (Direct Amp profile, Voice Switch=Left, FAT=On, C45=On, SAT=Off)
H26D XXX VL F0C1S1 (Direct Amp profile, Voice Switch=Left, FAT=Off, C45=On, SAT=On)
H26D XXX VL F1C0S1 (Direct Amp profile, Voice Switch=Left, FAT=On, C45=Off, SAT=On)
H26D XXX VL F1C1S1 (Direct Amp profile, Voice Switch=Left, FAT=On, C45=On, SAT=On)

H26D SAM VR Gain-4 (Same as "H26D XXX VR F0C0S0" but with a gain of 4)
H26D XXX VR F0C0S0 (Direct Amp profile, Voice Switch=Right, FAT=Off, C45=Off, SAT=Off)
H26D XXX VR F1C0S0 (Direct Amp profile, Voice Switch=Right, FAT=On, C45=Off, SAT=Off)
H26D XXX VR F0C1S0 (Direct Amp profile, Voice Switch=Right, FAT=Off, C45=On, SAT=Off)
H26D XXX VR F0C0S1 (Direct Amp profile, Voice Switch=Right, FAT=Off, C45=Off, SAT=On)
H26D XXX VR F1C1S0 (Direct Amp profile, Voice Switch=Right, FAT=On, C45=On, SAT=Off)
H26D XXX VR F0C1S1 (Direct Amp profile, Voice Switch=Right, FAT=Off, C45=On, SAT=On)
H26D XXX VR F1C0S1 (Direct Amp profile, Voice Switch=Right, FAT=On, C45=Off, SAT=On)
H26D XXX VR F1C1S1 (Direct Amp profile, Voice Switch=Right, FAT=On, C45=On, SAT=On)

=============================

H26S V30 VL F0C0S0 (Studio profile, V30 Speaker, Voice Switch=Left, FAT=Off, C45=Off, SAT=Off)
H26S V30 VL F1C0S0 (Studio profile, V30 Speaker, Voice Switch=Left, FAT=On, C45=Off, SAT=Off)
H26S V30 VL F0C1S0 (Studio profile, V30 Speaker, Voice Switch=Left, FAT=Off, C45=On, SAT=Off)
H26S V30 VL F0C0S1 (Studio profile, V30 Speaker, Voice Switch=Left, FAT=Off, C45=Off, SAT=On)
H26S V30 VL F1C1S0 (Studio profile, V30 Speaker, Voice Switch=Left, FAT=On, C45=On, SAT=Off)
H26S V30 VL F0C1S1 (Studio profile, V30 Speaker, Voice Switch=Left, FAT=Off, C45=On, SAT=On)
H26S V30 VL F1C0S1 (Studio profile, V30 Speaker, Voice Switch=Left, FAT=On, C45=Off, SAT=On)
H26S V30 VL F1C1S1 (Studio profile, V30 Speaker, Voice Switch=Left, FAT=On, C45=On, SAT=On)

H26S V30 VR F0C0S0 (Studio profile, V30 Speaker, Voice Switch=Right, FAT=Off, C45=Off, SAT=Off)
H26S V30 VR F1C0S0 (Studio profile, V30 Speaker, Voice Switch=Right, FAT=On, C45=Off, SAT=Off)
H26S V30 VR F0C1S0 (Studio profile, V30 Speaker, Voice Switch=Right, FAT=Off, C45=On, SAT=Off)
H26S V30 VR F0C0S1 (Studio profile, V30 Speaker, Voice Switch=Right, FAT=Off, C45=Off, SAT=On)
H26S V30 VR F1C1S0 (Studio profile, V30 Speaker, Voice Switch=Right, FAT=On, C45=On, SAT=Off)
H26S V30 VR F0C1S1 (Studio profile, V30 Speaker, Voice Switch=Right, FAT=Off, C45=On, SAT=On)
H26S V30 VR F1C0S1 (Studio profile, V30 Speaker, Voice Switch=Right, FAT=On, C45=Off, SAT=On)
H26S V30 VR F1C1S1 (Studio profile, V30 Speaker, Voice Switch=Right, FAT=On, C45=On, SAT=On)

=============================

H26S M75 VL F0C0S0 (Studio profile, M75 Speaker, Voice Switch=Left, FAT=Off, C45=Off, SAT=Off)
H26S M75 VL F1C0S0 (Studio profile, M75 Speaker, Voice Switch=Left, FAT=On, C45=Off, SAT=Off)
H26S M75 VL F0C1S0 (Studio profile, M75 Speaker, Voice Switch=Left, FAT=Off, C45=On, SAT=Off)
H26S M75 VL F0C0S1 (Studio profile, M75 Speaker, Voice Switch=Left, FAT=Off, C45=Off, SAT=On)
H26S M75 VL F1C1S0 (Studio profile, M75 Speaker, Voice Switch=Left, FAT=On, C45=On, SAT=Off)
H26S M75 VL F0C1S1 (Studio profile, M75 Speaker, Voice Switch=Left, FAT=Off, C45=On, SAT=On)
H26S M75 VL F1C0S1 (Studio profile, M75 Speaker, Voice Switch=Left, FAT=On, C45=Off, SAT=On)
H26S M75 VL F1C1S1 (Studio profile, M75 Speaker, Voice Switch=Left, FAT=On, C45=On, SAT=On)

H26S M75 VR F0C0S0 (Studio profile, M75 Speaker, Voice Switch=Right, FAT=Off, C45=Off, SAT=Off)
H26S M75 VR F1C0S0 (Studio profile, M75 Speaker, Voice Switch=Right, FAT=On, C45=Off, SAT=Off)
H26S M75 VR F0C1S0 (Studio profile, M75 Speaker, Voice Switch=Right, FAT=Off, C45=On, SAT=Off)
H26S M75 VR F0C0S1 (Studio profile, M75 Speaker, Voice Switch=Right, FAT=Off, C45=Off, SAT=On)
H26S M75 VR F1C1S0 (Studio profile, M75 Speaker, Voice Switch=Right, FAT=On, C45=On, SAT=Off)
H26S M75 VR F0C1S1 (Studio profile, M75 Speaker, Voice Switch=Right, FAT=Off, C45=On, SAT=On)
H26S M75 VR F1C0S1 (Studio profile, M75 Speaker, Voice Switch=Right, FAT=On, C45=Off, SAT=On)
H26S M75 VR F1C1S1 (Studio profile, M75 Speaker, Voice Switch=Right, FAT=On, C45=On, SAT=On)

EDIT:
Added two profiles for Michael_dk
Here is the request:
Tim - could you try backing the sm57 off an inch or so, and maybe scoot it just a tiny bit
(a quarter to a half-inch) toward the center?
And then do some profiles with the F & S switches off, on the M75 speaker?

So here are the settings:
Presence 4
Bass 6
Middle 6
Treble 5
Master 3,5
Gain 8
Channel = BE
FAT = Off
C45 - On
SAT = Off
Voice = Left and Right (VL and VR)

Cab = Legacy 412 with M75's.
SM57 1-3/4 inches from speaker frame (was 3/4") and 3/4" from center (was on the dust cap edge or about 1-1/8" from center) and zero degrees angle. 

H26S Michael VL (Voice = Left)
H26S Michael VR (Voice = Right)