Have Amps, Will Profile: BE100 Phase 24 3/22/2015

In this session we will make some DA profiles to Sargeant_Pepper's specs.

PLEASE NOTE: these profiles were made with firmware 3.0.1 and should not be used with any firmware lower than 3.0.0.

The amp was loaded down with a Carvin Legacy 412 with Vintage 30's.

Here is Sargeant_Pepper's request:
HB and HBE Gain = from 1 to 7 like in Phase 21
Bass = 5,5
Mid = 6,5
Treb = 6 
Pres = 5
Voice Switch = Right
FAT = Off
C45 = Off
SAT = On
Master Vol = 4
...
Gain: 8 o'clock (so almost nothing here, just for a little little saturation)
Tone: 12 o'clock (Neural Settings)
Volume: Full (Giving the Amp some boost!)

Here are the file/profile names and what they mean:
====================================================
HAWP24 BE-1 (BE Channel, Gain = 1)
HAWP24 BE-2 (BE Channel, Gain = 2)
HAWP24 BE-3 (BE Channel, Gain = 3)
HAWP24 BE-4 (BE Channel, Gain = 4)
HAWP24 BE-5 (BE Channel, Gain = 5)
HAWP24 BE-6 (BE Channel, Gain = 6)
HAWP24 BE-7 (BE Channel, Gain = 7)

HAWP24 HBE-1 (HBE Channel, Gain = 1)
HAWP24 HBE-2 (HBE Channel, Gain = 2)
HAWP24 HBE-3 (HBE Channel, Gain = 3)
HAWP24 HBE-4 (HBE Channel, Gain = 4)
HAWP24 HBE-5 (HBE Channel, Gain = 5)
HAWP24 HBE-6 (HBE Channel, Gain = 6)
HAWP24 HBE-7 (HBE Channel, Gain = 7)

HAWP24 BE-1 T=Noon (BE Channel, Gain: 8 o'clock, Volume: Full)
HAWP24 HBE-1 T=Noon (HBE Channel, Gain: 8 o'clock, Volume: Full)

HAWP24 BE-1 SAT-OFF (BE Channel, Gain = 1 SAT Switch: Off)
HAWP24 BE-2 SAT-OFF (BE Channel, Gain = 2 SAT Switch: Off)