Have Amps, Will Profile: BE100 Phase 23 3/22/2015

In this session we will make some more DA profiles to Hallan's specs.

PLEASE NOTE: these profiles were made with firmware 3.0.1 and should not be used with any firmware lower than 3.0.0.

The amp was loaded down with a Carvin Legacy 412 with Vintage 30's.

Here is Hallan's request:
HBE Gain = 4 and 5 and 6
Bass = 6
Mid = 4,5
Treb = 5
Pres = 5
Voice Switch = left
FAT = Off
C45 = On
SAT = Off
Master Vol = 2.5 and 3.0 and 3.5
please, pay attention, this time SAT off..  ;)

Here are the file/profile names and what they mean:
====================================================
HAWP23D HBE-4 M-2.5 (Direct Amp profile, HBE gain = 4, Master Vol = 2.5)
HAWP23D HBE-5 M-2.5 (Direct Amp profile, HBE gain = 5, Master Vol = 2.5)
HAWP23D HBE-6 M-2.5 (Direct Amp profile, HBE gain = 6, Master Vol = 2.5)

HAWP23D HBE-4 M-3.0 (Direct Amp profile, HBE gain = 4, Master Vol = 3.0)
HAWP23D HBE-5 M-3.0 (Direct Amp profile, HBE gain = 5, Master Vol = 3.0)
HAWP23D HBE-6 M-3.0 (Direct Amp profile, HBE gain = 6, Master Vol = 3.0)

HAWP23D HBE-4 M-3.5 (Direct Amp profile, HBE gain = 4, Master Vol = 3.5)
HAWP23D HBE-5 M-3.5 (Direct Amp profile, HBE gain = 5, Master Vol = 3.5)
HAWP23D HBE-6 M-3.5 (Direct Amp profile, HBE gain = 6, Master Vol = 3.5)