Have Amps, Will Profile: BE100 Phase 21 3/15/2015

In this session we will profile the BE100 using the new DA/Merged profiling with firmware 3.0.1.

A few people have requested Direct Amp profiles with the new version 3 firmware,
Wingee and LiamThompson have asked for specfic amp settings so we will do that
and a handfull of profiles with the settings that I have been using lately.

If you want to try some different amp settings just let me know,
but please provide all of the settings (Bass, Mid, Treb, Pres, Master Vol and option switch settings).
Also let me know if you want both Studio and Direct Amp profiles or just the Direct Amp profiles,
and if you want Studio profiles please provide the mic info (see notes below for an example).

Here are the file/profile names and what they mean:
====================================================
HAWP21D Liam (Direct Amp profile)
HAWP21S Liam (Studio profile)
BE Gain = 8
Bass = 6
Mid = 8
Treb = 7
Pres = 7
Master Vol = 4
Voice Switch = Right
FAT = Off
C45 = Off
SAT = On
Shure SM57 & Audio Technical AT4040.
SM57 was 2" from the front of the speaker frame, 1/2 inch from the edge of the dome, angle = 0deg, level = 0dB.
AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer).
Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA.
====================================================
HAWP21D Wingee (Direct Amp profile)
HAWP21S Wingee (Studio profile)
HBE Gain = 5
Bass = 5
Mid = 5
Treb = 5
Pres = 5
Master Vol = 4
Voice Switch = Right
FAT = Off
C45 = Off
SAT = Off
Shure SM57 & Audio Technical AT4040.
SM57 was 2" from the front of the speaker frame, 1/2 inch from the edge of the dome, angle = 0deg, level = 0dB.
AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer).
Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA.
====================================================
HAWP21D Tim BE-1 (Direct Amp profile, BE channel gain = 1)
HAWP21S Tim BE-1 (Studio profile, BE channel gain = 1)
HAWP21D Tim BE-2 (Direct Amp profile, BE channel gain = 2)
HAWP21S Tim BE-2 (Studio profile, BE channel gain = 2)
HAWP21D Tim BE-4 (Direct Amp profile, BE channel gain = 4)
HAWP21S Tim BE-4 (Studio profile, BE channel gain = 4)
HAWP21D Tim BE-7 (Direct Amp profile, BE channel gain = 7)
HAWP21S Tim BE-7 (Studio profile, BE channel gain = 7)
HAWP21D Tim HBE-1 (Direct Amp profile, HBE channel gain = 1)
HAWP21S Tim HBE-1 (Studio profile, HBE channel gain = 1)
HAWP21D Tim HBE-2 (Direct Amp profile, HBE channel gain = 2)
HAWP21S Tim HBE-2 (Studio profile, HBE channel gain = 2)
HAWP21D Tim HBE-4 (Direct Amp profile, HBE channel gain = 4)
HAWP21S Tim HBE-4 (Studio profile, HBE channel gain = 4)
HAWP21D Tim HBE-7 (Direct Amp profile, HBE channel gain = 7)
HAWP21S Tim HBE-7 (Studio profile, HBE channel gain = 7)
BE and HBE Gain as noted
Bass = 4
Mid = 8
Treb = 7
Pres = 7
Master Vol = 3
Voice Switch = Right
FAT = Off
C45 = Off
SAT = Off
Audix i5 & Audio Technical AT4040.
i5 was 2" from the front of the speaker frame, 1 inch from the edge of the dome, angle = 0deg, level = 0dB.
AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = 0dB, Treble = -5 (on the mixer).
Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA.