Have Amps Will Profile - Friedman BE100 Phase-17
3/7/2015

In this session we will profile the amp with a 112 cab loaded with a Scumback M75 speaker.

For this session the amps gain, tone and volume settings were as follows:
Bass = 4
Mid = 8
Treb = 7
Pres = 7
Voice Switch = Right
Master Vol = 3
All option switches off.

Here are the mic positions and mix:
Shure SM57 & Audio Technical AT4040.
SM57 was 2" from the front of the speaker frame, 1/2 inch from the edge of the dome, angle = 0deg, level = 0dB.
AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer).
Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA.

Here is what the file/rig names mean:
HAWP17 BE1 (BE channel gain 1)
HAWP17 BE2 (BE channel gain 2)
HAWP17 BE4 (BE channel gain 4)
HAWP17 BE7 (BE channel gain 7)
HAWP17 HBE1 (HBE channel gain 1)
HAWP17 HBE2 (HBE channel gain 2)
HAWP17 HBE4 (HBE channel gain 4)
HAWP17 HBE7 (HBE channel gain 7)