Have Amps, Will Profile: BE100 Phase 15

In this session we will be trying a few profiles for LiamThompson. Here is his request:
===============================================
Right Tim, I'd be interested in seeing is if we can push bass up just a bit more than my last profiles and hopefully not destroy the super tight
bottom end you have on the last set you did for me. 
Like I say I don't think we'd be able to improve on my personal preferences for me but its worth a try while the amp is still all rigged up i guess. 

If time is an issue I'm mainly interested in Direct profiles, I'm sure the cabs from my other full profiles you made with merge well enough if
you don't have time to do full studio profiles as well and I can merge my own direct profiles no bother.

Settings I'd like to suggest for me would be:
All profiles - HBE Channel, All voice switch R, SAT On, Fat OFF, C45 OFF,
Gain 6, Bass 7, Mid 7, Treble 6.5, Presence 6, Master 3.5 
Gain 6, Bass 7, Mid 7, Treble 6.5, Presence 6, Master 4
Gain 6, Bass 8, Mid 7, Treble 6.5, Presence 6, Master 3.5
Gain 6, Bass 8, Mid 7, Treble 6.5, Presence 6, Master 4
Gain 6, Bass 7, Mid 5, Treble 6.5, Presence 6, Master 3.5 (try a little less mids as I was also liking the feel of Hallans settings)

And only if you have time as I feel I'm asking to much and have asked for enough compared to others already:
Gain 6, Bass 7, Mid 8, Treble 6.5, Presence 6, Master 3.5
Gain 6, Bass 7, Mid 8, Treble 6.5, Presence 6, Master 4
Gain 6, Bass 8, Mid 8, Treble 6.5, Presence 6, Master 3.5
Gain 6, Bass 8, Mid 8, Treble 6.5, Presence 6, Master 4

BE Channel, voice switch R, SAT On, Fat OFF, C45 OFF,
Gain 8, Bass 7, Mid 8, Treble 6.5, Presence 6, Master 4
Gain 8, Bass 8, Mid 8, Treble 6.5, Presence 6, Master 4
=================================================

For this test I am using firmware version 2.7.4 Release, the same firmware that I've used for previous HAWP BE100 sessions.

PLEASE NOTE: IN THIS SESSION WE WILL BE INCLUDING DI PROFILES, THESE WERE MADE WITH THE NEW PROFILING METHOD USING FIRMWARE 2.7.4 RELEASE,
IT IS HIGHLY RECOMMENDED THAT YOU ONLY USE THESE DI PROFILES WITH THE SAME FIRMWARE VERSION.
BECAUSE THIS NEW PROFILING METHOD IS NOT YET OFFICIAL BY USING THESE PROFILES YOU DO SO AT YOUR OWN RISK.

Here are the mic positions and mix:
Shure SM57 & Audio Technical AT4040.
SM57 was 2" from the front of the speaker frame, 1/2 inch from the edge of the dome, angle = 0deg, level = 0dB.
AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer).
Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA.


Here are the file names and the meaning:

H15D HBE6 B7M7Ms3.5 (HBE Channel gain 6, Bass 7, Mid 7, Treb 6.5, Pres 6 Master Vol 3.5, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)
H15D HBE6 B7M7Ms4.0 (HBE Channel gain 6, Bass 7, Mid 7, Treb 6.5, Pres 6 Master Vol 4.0, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)
H15D HBE6 B8M7Ms3.5 (HBE Channel gain 6, Bass 8, Mid 7, Treb 6.5, Pres 6 Master Vol 3.5, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)
H15D HBE6 B8M7Ms4.0 (HBE Channel gain 6, Bass 8, Mid 7, Treb 6.5, Pres 6 Master Vol 4.0, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)
H15D HBE6 B7M5Ms3.5 (HBE Channel gain 6, Bass 7, Mid 5, Treb 6.5, Pres 6 Master Vol 3.5, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)

H15D HBE6 B7M8Ms3.5 (HBE Channel gain 6, Bass 7, Mid 8, Treb 6.5, Pres 6 Master Vol 3.5, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)
H15D HBE6 B7M8Ms4.0 (HBE Channel gain 6, Bass 7, Mid 8, Treb 6.5, Pres 6 Master Vol 4.0, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)
H15D HBE6 B8M8Ms3.5 (HBE Channel gain 6, Bass 8, Mid 8, Treb 6.5, Pres 6 Master Vol 3.5, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)
H15D HBE6 B8M8Ms4.0 (HBE Channel gain 6, Bass 8, Mid 8, Treb 6.5, Pres 6 Master Vol 4.0, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)

H15D BE8 B7M8Ms4.0 (HBE Channel gain 8, Bass 7, Mid 8, Treb 6.5, Pres 6 Master Vol 4.0, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)
H15D BE8 B8M8Ms4.0 (HBE Channel gain 8, Bass 8, Mid 8, Treb 6.5, Pres 6 Master Vol 4.0, Voice=Right, SAT=On, FAT=Off,C45=Off, DI Profile)