Have Amps, Will Profile: BE100 Phase 12

In this session we will try some more clean profiles.

For this test I am using firmware version 2.7.4 Release, the same firmware that I've used for previous HAWP BE100 sessions.

Here are the mic positions and mix:
Shure SM57 & Audio Technical AT4040.
SM57 was 2" from the front of the speaker frame, 1/2 inch from the edge of the dome, angle = 0deg, level = 0dB.
AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer).
Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA.

On the clean channel there is only a Bass, Treble and Volume control, and there is a 3-way bright switch that has a left, middle and right position.
Instead of trying to present what I thought was a good clean sound I tried to present enough variations so you can tell what each control does,
then you can ask me to make any adjustments that you want and make some more profiles.

Here are the file names and what they mean:
HAWP12C3 B3T3 BRT-L (Clean channel, Volume=3, Bass=3, Treb=3, Bright Switch=Left)
HAWP12C3 B3T3 BRT-M (Clean channel, Volume=3, Bass=3, Treb=3, Bright Switch=Middle)
HAWP12C3 B3T3 BRT-R (Clean channel, Volume=3, Bass=3, Treb=3, Bright Switch=Right)

HAWP12C3 B7T3 BRT-L (Clean channel, Volume=3, Bass=7, Treb=3, Bright Switch=Left)
HAWP12C3 B7T3 BRT-M (Clean channel, Volume=3, Bass=7, Treb=3, Bright Switch=Middle)
HAWP12C3 B7T3 BRT-R (Clean channel, Volume=3, Bass=7, Treb=3, Bright Switch=Right)

HAWP12C3 B3T7 BRT-L (Clean channel, Volume=3, Bass=3, Treb=7, Bright Switch=Left)
HAWP12C3 B3T7 BRT-M (Clean channel, Volume=3, Bass=3, Treb=7, Bright Switch=Middle)
HAWP12C3 B3T7 BRT-R (Clean channel, Volume=3, Bass=3, Treb=7, Bright Switch=Right)

HAWP12C3 B7T7 BRT-L (Clean channel, Volume=3, Bass=7, Treb=7, Bright Switch=Left)
HAWP12C3 B7T7 BRT-M (Clean channel, Volume=3, Bass=7, Treb=7, Bright Switch=Middle)
HAWP12C3 B7T7 BRT-R (Clean channel, Volume=3, Bass=7, Treb=7, Bright Switch=Right)

HAWP12C4 B7T7 BRT-L (Clean channel, Volumer=4, Bass=7, Treb=7, Bright Switch=Left)
HAWP12C5 B7T7 BRT-L (Clean channel, Volume=5, Bass=7, Treb=7, Bright Switch=Left)

Note: The first 12 profiles compare the different tone control and bright switch settings, the last two profile compare different Master Volume settings.