Have Amps, Will Profile: BE100 Phase 11

In this session we will profile the BE100 as per Hallan's request.

Here are the mic positions and mix:
Shure SM57 & Audio Technical AT4040.
SM57 was 2" from the front of the speaker frame, 1/2 inch from the edge of the dome, angle = 0deg, level = 0dB.
AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer).
Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA.

Here are the amp settings:
HBE Gain = 4 and 5 and 6
Bass = 6.5
Mid = 4.5
Treb = 7
Pres = 5
Voice Switch = left
FAT = Off
C45 = On
SAT = On
Master Vol = 2.5 and 3.0 and 3.5

Here are the file names and what they mean:
HAWP11 HBE4 MV2.5 (HBE Gain 4, Master Volume 2.5)
HAWP11 HBE4 MV3.0 (HBE Gain 4, Master Volume 3.0)
HAWP11 HBE4 MV3.5 (HBE Gain 4, Master Volume 3.5)

HAWP11 HBE5 MV2.5 (HBE Gain 5, Master Volume 2.5)
HAWP11 HBE5 MV3.0 (HBE Gain 5, Master Volume 3.0)
HAWP11 HBE5 MV3.5 (HBE Gain 5, Master Volume 3.5)

HAWP11 HBE6 MV2.5 (HBE Gain 6, Master Volume 2.5)
HAWP11 HBE6 MV3.0 (HBE Gain 6, Master Volume 3.0)
HAWP11 HBE6 MV3.5 (HBE Gain 6, Master Volume 3.5)