Have Amps Will Profile - Friedman BE100 Phase-06

In this session we will try the different option switches on the amp. Here is the description of the option switches from the manual:

VOICE SWITCH...	This is a subtle yet effective tonal variance for the BE/HBE channel,
		left position is slightly darker with more mids, right position is slightly brighter with a bigger bass.

FAT SWITCH.....	Like it says, makes the BE100 sound fatter. Great for single coil pickups.

C45 SWITCH.....	This is a custom-voicing switch for the BE/HBE channel. Turn it on, if you like leave it on. It’s kinda cool.

SAT SWITCH.....	Primarily designed to be used in the BE or C45 mode to add gain, compression and saturation, 
		it is normal for the volume level to drop with this switch engaged. Compensate with the amp’s Master volume.


For this session the amps gain, tone and volume settings were as follows:
BE Gain = 7
Bass = 4
Mid = 8
Treb = 7
Pres = 7
Master Vol = 2

Here are the mic positions and mix:
Shure SM57 & Audio Technical AT4040.
SM57 was 2" from the front of the speaker frame, 1/2 inch from the edge of the dome, angle = 20deg towards the center of the speaker, level = 0dB.
AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer).
Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA.

I wanted to do multiple tests at different gain/channel setting but the number of profiles quickly added up to a huge amount,
so I settled on one channel/gain setting. If you want a particular gain/channel/switch combination please ask and I'll do my best.

To try and make the names fit on the screen I did the following:
V=Voice
F=FAT
C=C45
S=SAT
0=Off
1=On

Here is what the names mean:

HAWP6 VL F0 C0 S0 (Voice=Left FAT=Off C45=Off SAT=Off)
HAWP6 VR F0 C0 S0 (Voice=Right FAT=Off C45=Off SAT=Off)

HAWP6 VL F1 C0 S0 (Voice=Left FAT=On C45=Off SAT=Off)
HAWP6 VR F1 C0 S0 (Voice=Right FAT=On C45=Off SAT=Off)

HAWP6 VL F0 C1 S0 (Voice=Left FAT=Off C45=On SAT=Off)
HAWP6 VR F0 C1 S0 (Voice=Right FAT=Off C45=On SAT=Off)

HAWP6 VL F0 C0 S1 (Voice=Left FAT=Off C45=Off SAT=On)
HAWP6 VR F0 C0 S1 (Voice=Right FAT=Off C45=Off SAT=On)

HAWP6 VL F1 C1 S0 (Voice=Left FAT=On C45=On SAT=Off)
HAWP6 VR F1 C1 S0 (Voice=Right FAT=On C45=On SAT=Off)

HAWP6 VL F1 C0 S1 (Voice=Left FAT=On C45=Off SAT=On)
HAWP6 VR F1 C0 S1 (Voice=Right FAT=On C45=Off SAT=On)

HAWP6 VL F0 C1 S1 (Voice=Left FAT=Off C45=On SAT=On)
HAWP6 VR F0 C1 S1 (Voice=Right FAT=Off C45=On SAT=On)

HAWP6 VL F1 C1 S1 (Voice=Left FAT=On C45=On SAT=On)
HAWP6 VR F1 C1 S1 (Voice=Right FAT=On C45=On SAT=On)