This is the fifth Kemper Community profile of the BE100 (Phase-05).

This is a simple two profile test comparing having the SM57 pointed at 20 degrees towards the center of the speaker vs. 0 degrees.
Amp = Friedman BE100 (2014 Model)
Speaker = Carvin Legacy 412 with stock Vintage 30's.

Used dual mic's...
Shure SM57 & Audio Technical AT4040.
SM57 was 2" from the front of the speaker frame, 1/2 inch from the edge of the dome, angle = 20deg towards the center or 0deg of the speaker, level = 0dB.
AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer).

Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA.

Amp settings...
BE Gain = 8
Presence = 5
Bass = 7
Middle = 7
Treble = 6
Master = 2
Voice Switch = Right
FAT = Off
C45 = Off
SAT = Off

HAWP4 BE8 SM57 20deg (BE channel gain=8, SM57 pointed 20 degrees towards the center of the speaker).
HAWP4 BE8 SM57 0deg (BE channel gain=8, SM57 pointed 0 degrees or straight at the speaker).