This is the fourth Kemper Community profile of the BE100 (Phase-04).

Based on Quitty's request we are trying a slight change of the Mid at a gain of 8 and 9 on the BE channel. 
I also did the same profiles with the voice switch to the left, so we can hear the difference that this switch makes.

Amp = Friedman BE100 (2014 Model)
Speaker = Carvin Legacy 412 with stock Vintage 30's.

Used dual mic's...
Shure SM57 & Audio Technical AT4040.
SM57 was 2" from the front of the speaker frame, 1/2 inch from the edge of the dome, angle = 20deg towards the center of the speaker, level = 0dB.
AT4040 was 2" from the front of the speaker frame, 1" from the edge of the dome, angle = 0deg, level = -5dB, Treble = -5 (on the mixer).

Mic's were ran into an Allen Heath Mix Wizard 16:2 and then into the KPA.

Amp settings...
BE Gain = 8 & 9 (CHANGE FROM HAWP-1)
Presence = 5
Bass = 7
Middle = 6 & 7 (CHANGE FROM HAWP-1)
Treble = 6
Master = 2
Voice Switch = Right & Left (CHANGE FROM HAWP-1)
FAT = Off
C45 = Off
SAT = Off



There are also some photos in the folder showing the amp, cab and mic's.

HAWP4BE8 B7M6T6P5R (BE Gain-8 Bass-7 Mid-6 Treb-6 Pres-5 Voice Switch-Right)
HAWP4BE9 B7M6T6P5R (BE Gain-9 Bass-7 Mid-6 Treb-6 Pres-5 Voice Switch-Right)
HAWP4BE8 B7M7T6P5R (BE Gain-8 Bass-7 Mid-7 Treb-6 Pres-5 Voice Switch-Right)
HAWP4BE9 B7M7T6P5R (BE Gain-9 Bass-7 Mid-7 Treb-6 Pres-5 Voice Switch-Right)
HAWP4BE8 B7M6T6P5L (BE Gain-8 Bass-7 Mid-6 Treb-6 Pres-5 Voice Switch-Left)
HAWP4BE9 B7M6T6P5L (BE Gain-9 Bass-7 Mid-6 Treb-6 Pres-5 Voice Switch-Left)
HAWP4BE8 B7M7T6P5L (BE Gain-8 Bass-7 Mid-7 Treb-6 Pres-5 Voice Switch-Left)
HAWP4BE9 B7M7T6P5L (BE Gain-9 Bass-7 Mid-7 Treb-6 Pres-5 Voice Switch-Left)


Please note that I rounded the treble setting up from 5.5 to 6 in order to fit the full name on the display.